Getting started with the SODAQ SARA R4

Getting Started
,
1

Learn about how to get started with the SODAQ SARA R4, supporting LTE-M as well as GPRS.

Detailed instructions can be found via the link below. Please use this topic to ask any question.

1 Like
2

Hello, I tried connecting SARA SFF module with the Monogoto SIM card but I cannot get any events or connection to be seen in the Monogoto console or hub. I followed the guide, checked also the AT commands page, covereage and profile (B and Poland) of SIM card. What might I have missed? Dump of AT commands:

OK
at+cfun=15

OK
at+cereg?

+CEREG: 0,5

OK
at+cgdcont?

+CGDCONT: 1,"IP","data.mono","10.136.xxx.xxx",0,0,0,0,0,0

OK
at+csq

+csq: 21,99

OK
at+cgact?

+CGACT: 1,1

OK
at+cereg?

+CEREG: 0,5

OK
AT+CGPADDR

+CGPADDR: 1,10.136.xxx.xxx <-hidden ;)

OK
at+cops?

+cops: 1,0,"Orange IoT",7

OK
1 Like
3

Hi Jakub,

It seems that you have established a success connection as you received an IP address from Monogoto.

There are 2 ways to check the connection in Monogoto:
1. Using the Monogoto Hub

  • Visit the Hub
  • Select Things
  • Select a specific Things
  • Look at the “last connection” in the top left corner

2. Using the Console:

  • Visit the Console
  • Select Things
  • Select a specific Things
  • Scroll down to “EVENTS” to find the logs

To test if you can actually send data, have a look at the guide I wrote to send a http message to webhook.site.